Add Bookmark | Recommend this book | Back to the book page | My bookshelf | Mobile Reading

Free Web Novel,Novel online - All in oicq.net -> Romance -> Technology Throne

Chapter 249 Reverse Engineering

Previous page        Return to Catalog        Next page

    Two Type 59 tanks equipped with laser rangefinders, one of which is in Guan Fei's private testing laboratory, is set up on a large workbench.  Yikan?Book¡¤1?k?a?n?s?h?u¡¤cc Zou Yongdong and other technicians boarded the workbench, surrounded the tank, and compared the manuals to identify the various parts and electronic accessories on it.  .  Then, labels with numbers printed on them are affixed to the surface of each detachable component to mark them.  "Get up! Get up! Get up! Stop!" After all the parts that could be touched from the outside were attached, a crane slid silently to the top of the tank, and then technicians fixed the steel cables to the turret and disassembled it.  Hanged up.  Afterwards, the technicians gathered together to mark and label the internal parts.  First, the turret and body are separated, then the tracks and engine are peeled off layer by layer from the outside to the inside.  After all the parts were labeled, a complete Type 59 tank was reduced to its parts and placed on the floor in a workshop of several hundred square meters.  The two latest improved Type 59 tanks specially selected by Xia Zhongyuan were dismantled into parts.  If he knew, he would probably jump on his feet and scold Guan Fei for being a prodigal.  If even a screw is counted as a component, a tank has no less than 100,000 components.  It¡¯s just that these small parts of the same type don¡¯t take up much space themselves, and they are collected together in a plexiglass box, so they don¡¯t take up too much space either.  Other connected parts, such as those connected in a special way, were also removed as a whole without violent disassembly to avoid being unable to restore them.  In addition, electronic accessories such as laser rangefinders, internal communication systems, and vehicle command systems were also completely removed from the vehicle without being damaged.  Otherwise, if all the parts are spread out, it will be enough to cover the entire training ground outside.  That¡¯s right, what Guan Fei wants to do is to use this 59 as a model and gather all the existing research units in the base to reverse engineer it.  He has to!  In Guan Fei¡¯s game material library, there are indeed models of all weapons in human history, but after all, these are only models, not original design drawings.  ?Ò»¿´Êé??w?ww?¡¤1?k?an?sh?u?¡¤cc No matter how realistic games simulate reality, every part of the weapon can be perfectly copied according to the real thing, and even the physical characteristics and  The electrical characteristics remain the same as the original version.  However, the so-called physical characteristics and electrical characteristics are just setting parameters added by **********. No matter how powerful the computing power of the game device is, it will not be wasted on reproducing the metal material, processing technology, etc. of the weapon.  On the surface treatment, as well as every component of the electronic equipment, a comprehensive simulation game is ultimately a game, not an engineering construction design drawing!  Guan Fei can draw the appearance of each part of the 59 tank. By setting parameters, he can also understand the metal properties, surface strength and toughness of each part, and the electromagnetic protection level and weaknesses of electronic equipment, but these are also  It is the initial setting given by the game and cannot involve important data such as the actual material used, processing technology, surface treatment technology, etc. of the component.  He can only distribute these things to various research units and conduct reverse mapping, and then he can find suitable materials and manufacturing processes from the biological assistant brain's database to replace them.  In fact, reverse engineering all over the world is the same thing.  Everyone conducts reverse mapping of the acquired target equipment, deduce the functions and parameters of each component, absorbs the design principles, selects the advantages and blends them into similar equipment of their own, and then uses their own existing equipment.  Materials and processing techniques are used for copycat manufacturing.  No one would be stupid enough to copy someone else¡¯s stuff exactly as it is.  Not to mention that intellectual property rights seem to be useful, in fact, there is no binding protection for big powers. What is the meaning of doing so?  No matter how perfect your copy is, at best it will only reach the technical level that others have mastered, and it will not help you improve yourself.  Reference, absorption, improvement, this is the only purpose of reverse engineering!  Guan Fei did the same thing.  To??Read the book w?ww?¡¤1?k?anshu¡¤cc At the beginning, the base area was very poor, with neither ability nor manpower. He was the only one at the front, and he had to do everything by himself.  But after four and a half years, the base area has developed small but sophisticated manufacturing capabilities, including multi-disciplinary research institutions in machinery, electronics, chemical engineering, etc., equipped with advanced scientific research instruments and employing more than 10,000 researchers.  According to the scientific research plan formulated by Guan Fei, these researchers have re-study, accumulated, and performed laboratory operations in the early years. They have made up for the lack of knowledge structure after being away from the front line of scientific research for many years, and have caught up with the latest technology again.?Scientific research trend, with first-class scientific research level.  With the help of the May 9th Improvement Project, they can turn from learning to practice, thereby truly transforming the research strength of the base area into productivity.  Only when they all have the ability to act alone can Guan Fei escape from the dilemma of working alone, truly liberate his energy from specific affairs, and return to the position that a leader should have, commanding the overall situation from a high position, and through local details.  Adjust the ground and skillfully lead the base area to develop along his preset track.  Watch the technicians carefully inspect each disassembled component and then put it into different upholstered wooden boxes.  Then he pasted the transfer units on the surface of the wooden box and put them aside into categories, waiting to be distributed to various research units. Guan Fei nodded slightly.  There is a bird in Nanshan. It has not flown for three years, and then it soars into the sky. It has not sounded for three years, and it has become a blockbuster!  This is the time!  But before that, he still has to make some preparations, which will delay him a little longer.  On the other hand, this is nothing. Why don't you miss the job of chopping wood? The more complete the preparation in advance, the better the effect. Even if it takes a little time, it doesn't matter.  Besides, it also takes time for various research institutions to conduct reverse surveying and mapping. He just took advantage of this gap to promote the implementation of a project he had planned for a long time It entered June, and a number of new factories were completed and put into operation in the base area.  If the construction of a new city is just beginning, no matter how big the factory is, even if it is a small supporting factory with one or two hundred people, the base area will use it as a symbol to boost morale and let all the soldiers and civilians in the base area see hope for the future.  There was a big celebration and it was widely publicized on the radio and newspapers.  If it was a year ago, when the base area had just repelled the encirclement and suppression by the Yidian Army, it was a time when people's hearts were unstable. At the same time, there were only 129 enterprises in the entire base area. The completion of the new factory was worthy of special mention.  Great news that stabilizes people's hearts.  But today, one year later, the base area has unprecedented external security and unprecedented internal unity and stability. It is no longer necessary to use this method to boost morale.  And as the external security of the base area has been comprehensively improved, a small but sophisticated processing and manufacturing base has been established in the early stage, and the construction is gradually on the right track, entering a period of high expansion.  The speed has been increasing steadily. In the first half a year, two factories were built. After a year, one factory was built every month. After two years, two to three factories were put into production every month. After the victory of the counter-encirclement and suppression campaign, it suddenly increased to new production every month.  With ten to fifteen new factories, the number of newly employed workers per month has increased to tens of thousands!  Now, there are 206 factories in operation in the base area.  In just half a year, 77 new factories were added, including 21 large factories with more than 1,000 employees, and a total of more than 60,000 workers!  On the one hand, this is due to the fact that all the soldiers and civilians in the base area are eager to live a good life and are highly motivated to work. At the same time, their own production capacity continues to increase, and construction has naturally entered the fast lane.  At the same time, it is also inseparable from strong domestic support.  For outsourcing processing orders provided by the base area, all domestic comers are welcome, and various ministries and commissions personally come forward to actively help coordinate and resolve production materials, production capacity, outsourcing manufacturers and other links. The number of production line equipment parts processed by domestic agents has doubled month by month.  Only then can the base area be able to expand at such a fast speed.  When Guan Fei solves the funding problem, it can be said that there will be almost no bottlenecks in the development of the base area, and we can continue to expand at this rate.  According to the estimates of the Ministry of Civil Affairs of the base area, by the end of 2018, the number of factories in the base area will reach 200 and the number of workers will reach 100,000.  Moreover, under the new plan, the new city will be a composite industrial base with the electronics industry as the main body in the future, Guogen County will be mainly heavy industries such as machinery manufacturing, and Muse will be the future chemical industry base. Located in the center of the base area,  Tamengye, which is surrounded by mountains and is easy to keep secret and defend, is the military industrial base after the base area.  In the past six months, the above-mentioned towns have completed power transmission and communication line reconstruction projects, and established one to two cement plants with a capacity of 5,000 people, as well as supporting lime, sand and gravel and other raw material plants.  According to the urban construction planning drawings provided by Guan Fei, spacious flat land was selected for the construction of a new urban area not far from the old city, and at the same time, the construction of functional areas such as industrial areas, residential areas, and commercial areas was carried out.  In order to support the construction work of the above-mentioned industrial bases, more than half of the construction teams with rich inspections were mobilized from the base area and transferred to various places. After absorbing a large number of local people, they were invested in the construction work.  And the transfer of these construction units will not affect the construction of the new city.  After nearly five years of construction, the new city master plan is nearly 58% complete. The remaining parts can be slowly improved in the coming days. It does not require too much time.??'s construction unit.  Nowadays, on the radio and in newspapers, there are articles promoting the construction plans of various new towns every day. They report inspiring information about the start of projects in various places, as well as reports of local people actively participating in the construction of new towns. Regarding the completion and commissioning of new factories,  Most of them were passed off in passing and not widely reported.  But they don¡¯t know that among these factories that have just been built and put into production and even have some weird names, there are several Guan Fei who have already been looking forward to it.  It¡¯s just that the production equipment of these factories has more than 80% precision components. The several precision manufacturing factories in the base area have many businesses and limited production capacity. It took until the middle of the year to finally complete the construction, assist the manufacturers in installing them, and start trial operation.  .  As soon as Guan Fei heard that the factories he had longed for were finally completed and put into production, he immediately decided to take a break and promote a major project that he had been waiting for many years before the May 9th improved design was launched.  ¡­ Wearing a full anti-static suit, Guan Fei, accompanied by the factory party committee secretary, factory director, workshop director and other management cadres, stood outside a high-strength glass wall and looked intently at the work of the workers.  The cleanliness of this workshop is no less than that of precision instrument factories, precision machinery factories and other enterprises, but even worse.  And because the base is able to mass-produce actuarial-type processors, the level of automation of the production line is high, which is unmatched by early companies.  The entire assembly line, more than 90% of the links, are all automated by the production line. The main role of the workers is not to operate the equipment, but to monitor the normal operation of the equipment and eliminate faults in a timely manner.  Under his gaze, pieces of thin aluminum alloy discs are being rapidly formed. Mobile phone users please visit http://m.piaotia.net
Didn't finish reading? Add this book to your favoritesI'm a member and bookmarked this chapterCopy the address of this book and recommend it to your friends for pointsChapter error? Click here to report