Add Bookmark | Recommend this book | Back to the book page | My bookshelf | Mobile Reading

Free Web Novel,Novel online - All in oicq.net -> Romance -> Technology Throne

Chapter 162 Limitations of the Times

Previous page        Return to Catalog        Next page

    "Remove all guns with a total length of more than 800 millimeters!" Guan Fei thought for a moment and issued the first screening order. ? ? ? ? ? ? ? ? ? ? ? A soft sound was used as a dubbing sound, and the densely packed firearms in front of him suddenly disappeared by more than half.  ??Among them, the basic model of the m16 and its subsequent versions, as well as its extended gun family, are all like bubbles, bursting open and disappearing before their eyes with afterimages.  There is only one assault type left. ?? &¡·;Ak series, including the follow-up ones, have lost more than half, leaving only folding and submachine gun models.  Firearms from other countries have also broken apart one by one, leaving only folding models, submachine guns, and buttless designs.  " Most of the light clusters are still retained, and only the Type 95, 95-1, 95-2, and Type 03 independently developed and produced by China are still relatively densely clustered.  No wonder.  Westerners must design firearms suitable for Western body shapes. As assault rifles used in wars, they will design full-size versions.  Even if there are versions such as folding and telescopic butts, they are all designed to adapt to the usage habits of Western-sized soldiers in the jungle.  These folding, telescopic, buttless automatic rifles are designed to quickly draw out the gun when fighting in mountains, jungles, and cities without pursuing accuracy.  Their uses are relatively limited, and they cannot conquer the world with one gun. They need to be combined with other weapons, such as full-stock automatic weapons.  "If China wants to equip weapons suitable for Eastern people's body types, it can only refer to other people's design ideas, and it still has to rely more on its own research and development.  Therefore, the design was designed based on the Chinese body shape, usage habits, load-bearing, and combat purposes from the very beginning, which naturally better meets the conditions.  Moreover, around a core gun type, a wide variety of gun families have been designed with wider adaptability.  Guan Fei hesitated for a while, then took out several foreign firearms from the light group and tried them out.  Based on his actual experience in the military for several years, these guns are indeed larger, but because they use more composite materials, the gun bodies are not too heavy.  Its human-machine functions are also fully considered, and the hand experience is good when carrying and shooting.  Full-power bullets have greater recoil, but using 5.56 small-caliber bullets is much better.  When tested at a simulated shooting range, its accuracy was higher than that of the AK series and the Type 56 used by military divisions.  However, in the folded form, since it cannot rest well against the shoulders and waist, it is basically impossible to carry out precise attacks. It can only perform probabilistic shooting and rely on widespread barrage attacks to try to suppress the opponent.  To shoot accurately, you can only do it after opening the folding stock.  After some trials, Guan Fei removed all foreign firearms.  It¡¯s not a firearm designed for Chinese people, so I¡¯m still not used to it.  Considering the continuity of weapons, it is better to choose domestically produced weapons.  Guan Fei looked at the domestic Type 03 and 95 series.  Type 03 actually also has a folding butt, and the muzzle jump feels quite severe during actual shooting.  Moreover, the butt and barrel are not on the same baseline, which affects the shooting accuracy when aiming and shooting. After using it for a period of time, it will be much better once you get used to it.  Another thing that Guan Fei is not very satisfied with is that in order to shorten the length of the gun body and ensure the size of the butt of the Type 03, the length of the barrel has been shortened, and small-caliber bullets have been used.  Therefore, the muzzle velocity is not enough, and the fired bullet feels a bit floaty. The hit accuracy and penetration are not as good as the M series, and the penetration is lower than the Ak series.  The first thing you feel when you use the 95 style is that it is very light.  It is almost three kilograms lighter than the Type 03, much lighter than the M series and the Ak series. Even compared with foreign military bullpup rifles, it is still lighter.  Guan Fei put it on his shoulder. The center of gravity of the bullpup rifle is located far back. He immediately felt that most of the weight of the gun fell on his shoulders, and the posture of holding the gun felt very comfortable.  He fell in love with the rifle immediately.  By tilting your head slightly, the gun body and the aiming hole are in a straight line. There is no need to adjust, and you can hit wherever you point almost immediately.  The actual shooting accuracy is better than that of Type 03, and it also has a slight advantage over m16a2.  And because it is a bullpup design, the barrel length reaches 49.5 centimeters, which is a full five centimeters longer than the Type 03.  Within a distance of 100 meters, the ballistic trajectory is very straight, and the 5.8mm ordinary bullet can easily penetrate a standard steel plate with a thickness of one centimeter.  At the ultimate shooting distance of 700 meters, it actually penetrated a standard steel plate of 0.3 centimeters. It can be found that its penetration power is quite good.  With this power, before the enemy is equipped with level 4 or above protective equipment, Type 95 can cause considerable damage to the enemy.  In Guan Fei's mind, he is already roughly inclined to this type of gun.  There are also many bullpup rifles designed abroad. Some guns have higher shooting accuracy than the Type 95, but the processing accuracy requirements are also extremely high, and a large number of composite materials are used to reduce weight.  It¡¯s not that Guan Fei can¡¯t make composite materials, there are countless different recipes.  But high-quality copyComposite materials, the requirements for raw materials and production lines are also ridiculously high, which is not what the military division can do now.  Some raw materials can be purchased from abroad, but in this era, the prices of these materials are quite high.  Just buying it is neither economical nor safe, and it is easy for the other party to cut off external supply channels.  In fact, the Type 95 is not that easy to make. The external engineering materials of the gun body also need to build a special production line.  But the raw materials for its production can be purchased in large quantities at home, so there is no need to worry about running out of stock.  With the introduction of the vacuum electroslag remelting furnace, the ability to manufacture gun barrels and internal metal parts is also available, and the heat treatment equipment is also complete.  There is no need to build more supporting production lines to achieve mass manufacturing, and the cost and manufacturing difficulty are greatly reduced.  "However, the Type 95 is not without its shortcomings. On the contrary, it has serious flaws inherent in a bullpup rifle.  For example, the early version of the magazine was made of plastic, which had low strength and could not be hung up with an empty magazine.  In fierce battles, there is no prompt, and it is difficult for soldiers to find out whether there are still bullets; Another example is that the grip is too high, and you need to raise your head when shooting, which easily increases the risk of head exposure; The most serious problem is the bullpup rifle, where the ejection window is far away from the soldier  If your face is too close, the hot bullet casing will easily burn your face when thrown, and the smoke after firing will also interfere with your vision, irritate your eyes, and affect shooting.  Fortunately, China has invested a lot of effort in this rifle and continuously improved it. The 95-1 and 95-2 improved models have been released successively, and most of the design flaws have been corrected.  Such as lowering the height of the handle to reduce the exposure range; adding Picatinny tactical rails to install high-precision scopes and other accessories, etc.  After actually using the 95-2, Guan Fei determined that this gun type is very mature, has fully explored its design potential, and is very satisfied with all aspects of its performance.  Especially after more than ten years of improvement, the 95 series has become a series.  From full-size automatic rifles to short-barreled assault rifles, to drum-fed squad light machine guns, to belt-fed heavy machine guns with heavy barrels; accessories range from ordinary optical sights to infrared night vision aiming and firing  Grenades and miniature individual missiles form a complete gun family system.  This left Guan Fei with a lot of energy.  But even if he already had detailed appearance and component parameters, he still couldn't just manufacture it directly.  Weapons are also machines. If a machine only knows the appearance, size, strength and toughness of each component, and other parameters, trying to create the same thing is nothing more than a dream.  If it were so easy, the domestic technical level would not be worse than that of foreign countries: no matter how blocked it is, it is still possible to get a small amount of samples in China, and this is how it is done.  But what can we do if we get these samples?  Technicians and scientists measure every component most carefully, record its installation sequence, and take photos for record keeping.  But even if the drawings are restored, there is still nothing we can do without suitable materials, and without understanding the processing technology of each component, as well as the local heat treatment and chemical treatment.  Obtaining advanced foreign equipment can at best point out a way for the country's scientific and technological development, proving that it is right to go in this direction. It can strengthen R&D determination and accurately invest R&D funds. At the same time, the appearance and mechanical structure of parts can also help domestic scientists reduce R&D.  Time, nothing more!  The experiments that need to be done still have to be done. Without doing them, you cannot master the design parameters of the entire machine. Without these parameters, even if you restore 100% of someone else's stuff, as long as the other party makes slight modifications, they will be blind - I don't understand.  Why do we need to modify it like this? There is no formula or parameters.  It took a lot of effort to copy it, but you have released an improved version, and the internal structure has changed. Aren¡¯t you kidding us?  Therefore, even if it is imitated, the research process of others must be repeated in order to collect complete information.  After meeting the other party and improving it, we can immediately understand why it is based on the collected design parameters and whether it is useful.  ??And after truly understanding a technology, the other party may not have made improvements yet, but we can be the first to arrive and make new products with better performance. This is the advantage of latecomers.  Blindly imitating and copying can only harm others and not benefit oneself, and is meaningless.  But Guan Fei is not prepared to go through it again. It is too easy for him.  He has various material formulas for future generations. He only needs to understand the size of the parts and the force on each part, and he can easily find the best combination. Then, using the same design and different materials, he can immediately launch a product with the same appearance and appearance.  The interior is the same, but it is the same product made with different materials and processing techniques.  And because its materials are better, perhaps the cost, manufacturing difficulty, and performance are even better than the original!  This is it?When the United States acquires a Soviet engine, it will never follow the other party's manufacturing process. Instead, it will use its own more advanced manufacturing technology and material formulas to produce an engine with better performance than the Soviet original.  The United States and the Soviet Union have done this kind of thing more than once.  ¡°But the United States copies each other¡¯s equipment just to understand the design direction and help its own scientists develop ideas.  However, the Soviet Union couldn't make it even if it got the other party's equipment. It could only try to develop the same materials and processing techniques, or use its own materials and imitate them based on its own manufacturing technology.  Guan Fei is now playing the role of the United States. After analyzing all the dimensional data and component parameters of the Type 95-2, he just proposed to the biological deputy brain "take out the existing processing capabilities of the military division, use the material formula within twenty years, and copy  The design drawings and processes of this model of firearm are sufficient.  With just a command, countless design drawings immediately appeared in front of Guan Fei's eyes.  Each design drawing replaces part or all of the parts and materials of the original version with materials that can be smelted by the military division.  Different replacement solutions have different impacts on the original design, the performance may be higher or lower, the manufacturing process may be simple or complex, and so on.  Guan Fei thought about it repeatedly and finally chose two design options.  Of these two options, one has the best overall performance, but based on the current technical capabilities of the military division, the manufacturing requirements are too high. Unless Guan Fei does it himself, it is absolutely impossible to complete many aspects.  It is possible to hire eighth-level workers from China to make them by hand in small quantities, but there is no need to think about efficiency.  Being able to provide dozens or hundreds of pieces in a year is the greatest achievement of the hard work of the master craftsmen.  However, Guan Fei also decided to make a small amount of this high-quality product for use by army snipers.  The performance of the other model can only be said to be quite satisfactory, ranking in the middle and lower reaches of all design options.  Compared with the original version, some data are still lower.  But it has an advantage, that is, it can be manufactured in large quantities based on the current technical capabilities of the military division, and the cost is not too high.  After calculating the production line that needs to be supplemented, based on the production of only 10,000 units, the cost of a single gun is about 2,000 yuan, and the service life of the barrel is 40,000 rounds, which is basically the same as European and American firearms, neither good nor bad.  Of course, it goes without saying that the barrel life is several times longer than that of domestic guns.  But this is really not something to be happy about.  Two thousand RMB is almost equivalent to one thousand US dollars, which is more expensive than the US military¡¯s M16.  At this price, a force like Guan Fei, who is rich and has a small army, can still afford it. Other big countries such as the United States, the Soviet Union, and China dare not say that they will equip all their troops.  It¡¯s so luxurious!  But Guan Fei has no choice but to follow the economic laws of an era.  The cost of this solution is relatively low, but the materials are expensive.  He just had a vacuum electroslag remelting furnace. If the alloy materials required in the formula were not put into the production line and manufactured from primary material processing, they could only be purchased in this era.  However, the technology in this era is still too backward, and the cost of material production is too high, so it is impossible to save money even if you want to.  Guan Fei sighed.  This is the so-called limitation of the times. Even with the assistance of a biological accessory brain, he has no choice but to accept it.  
Didn't finish reading? Add this book to your favoritesI'm a member and bookmarked this chapterCopy the address of this book and recommend it to your friends for pointsChapter error? Click here to report